How to Swap Straps on Your Bronze Torsk-Diver

By Tsao Baltimore | Baltimore Watch Company | Published: 2026-10-19

Category: How-to Guides

Learn how to safely change the strap on your Bronze Torsk-Diver with or without quick-release pins. Step-by-step guidance to avoid scratches and keep your dive watch secure.

Quick Answer

To swap straps on your Bronze Torsk-Diver, use a spring bar tool or the quick-release levers if your strap has them. Work on a soft surface, align the spring bar with the lug holes, and always test the strap is secure before wearing.

Why Strap Swapping Matters for Your Bronze Torsk-Diver

The Bronze Torsk-Diver is a marine-grade CuSn8 bronze dive watch, and changing its strap lets you match it to different occasions or replace a worn strap without buying a new watch. A well-fitted strap also ensures comfort and security during daily wear or diving.

Bronze is a living metal that develops a patina over time. While strap changes don't affect the case finish directly, careless handling can scratch the bronze or damage the spring bars. Taking a few precautions keeps your timepiece looking its best.

Quick-Release vs. Standard Straps

Many straps, including those offered for the Torsk-Diver, come with quick-release pins that let you swap them without any tools. If your strap has small levers on the underside near the lugs, you can simply pull the lever and slide the strap out.

If your strap uses standard spring bars, you'll need a spring bar tool or a thin flathead screwdriver. The process is slightly more involved but still straightforward. Knowing which type you have determines the steps below.

Step-by-Step Strap Swap

Prepare your workspace: Lay a soft cloth or mat on a flat surface. Have your spring bar tool (or a small flathead screwdriver) and the new strap ready. If your strap has quick-release pins, you may not need any tools. Always work over a soft surface to avoid scratching the bronze case or losing small parts.
Remove the current strap: If using quick-release: locate the small lever on the underside of the strap near the lug, pull it toward you, and gently slide the strap out. If using standard spring bars: insert the forked end of your tool between the strap and the lug, compress the spring bar, and lift the strap away. Do not force the spring bar; if it resists, check that you're pressing the correct end.
Install the new strap: For quick-release: insert the pin into the lug hole, then push the strap until it clicks into place. For standard spring bars: position one end of the spring bar into the lug hole, then compress the other end with your tool and guide it into the opposite hole. Ensure both spring bar ends are fully seated in the lug holes before wearing.
Test the security: Gently pull the strap from both sides to confirm it's firmly attached. Check that the spring bar hasn't popped out and that the strap moves freely without excessive play. If the strap feels loose, remove and reinstall it; never wear a watch with an insecure strap.
Clean up and store the old strap: Wipe the removed strap with a soft dry cloth and store it in a cool, dry place away from direct sunlight. If you used tools, clean them to remove any debris. Proper storage extends the life of your spare straps.

About the Bronze Torsk-Diver

BRONZE TORSK-DIVER - MIDNIGHT BLUE: The Bronze Torsk-Diver features a marine grade CuSn8 bronze case and is limited to 423 individually numbered pieces. Because the case is bronze, avoid metal tools that could scratch the surface; use plastic or coated tools and work on a soft cloth.
BRONZE TORSK-DIVER - MIDNIGHT BLUE